Process fluctuations and contaminations impair quality in sugar production

Inline measurement technology for the early detection of foreign objects and moisture deviations

Process-critical parameters often change unnoticed during seasonal operation

In the sugar industry, seasonal production cycles, varying raw-material qualities and high throughput volumes directly affect process stability. Deposits can detach and appear as foreign objects. During the processing of pressed sugar beet pulp, moisture content significantly influences energy efficiency and material quality. Without continuous inline data, uncertainties arise in process control and quality assurance.

Early detection of foreign objects and moisture values makes it possible to keep processes stable and compensate for deviations during ongoing operation.GreCon Engineering

Lack of Transparency in the Process – Solid Facts from the Industry

In sugar production, many quality- and cost-relevant parameters are still monitored discontinuously or only by sampling. Without consistent inline measurement technology, the basis for reliably assessing processes and intervening in time is missing.

25 %

Material usage – typical overdosing without inline measurement

> 70 %

most quality deviations occur before final inspection

> 72 h

Time delay between process deviation and laboratory result

Solutions and concepts

Sugar production relies on two central measurement tasks: foreign object detection and moisture measurement. These can be technically covered by the following GreCon systems:

MATCONTROL HF model full-surface measurement installed above a production line

Inline foreign object detection

GreCon MATCONTROL HF provides high-resolution, full-surface monitoring of the material flow to detect density deviations, structural irregularities and foreign objects in real time. The measurement data support the stabilisation of upstream cleaning and conveying steps by identifying anomalies before they affect downstream processing.

LEARN MORE

Inline moisture measurement

GreCon MOISTURECONTROL measures the moisture content of beet pulp, pressed material or intermediate products continuously and without sampling delays. The real-time data enable more precise control of drying, pressing and pelletising, supporting energy-efficient operation and consistent material conditions.

LEARN MORE

The future of industrial measurement technology

“With increasing process dynamics, rising energy intensity and tighter tolerances, inline measurement technology is gaining importance. Modern plants no longer rely solely on final inspections but integrate measurement values directly into their control loops. Measurement technology is therefore becoming a decisive tool for stability, reproducibility and resource efficiency.”GreCon Engineering

Our approach to your measurement technology project

Every production process places its own demands on measurement technology. That is why we analyse your process, clarify the measurement task and offer you a solution tailored to your requirements. From the initial analysis right through to long-term support, we guide you through every phase of the project.

1On-site requirements analysis

Phase 1 of 5

On-site requirements analysis

Together, we analyse your production conditions and define the measurement task. If necessary, we test your material samples to determine the most suitable measurement technology for your process.

2Tailored solution concept

Phase 2 of 5

Tailored solution concept

Based on your requirements, we tailor our measurement concept specifically to your process. We also advise you on potential funding schemes to support more sustainable production. You will then receive a bespoke, transparent quotation.

3Engineering and project planning

Phase 3 of 5

Engineering and project planning

We plan the technical implementation of your measurement solution, from the positioning of the measurement equipment to its integration into your production line. We coordinate interfaces and installation requirements closely with your team.

4Installation and commissioning

Phase 4 of 5

Installation and commissioning

Our technicians install your measurement system, commission it and calibrate the measurement to suit your application. We train your team in its operation and in interpreting the results. On request, we work with you to configure the necessary interfaces for integrating the measurement data into your process control system.

5Service and long-term support

Phase 5 of 5

Service and long-term support

We are here for you even after commissioning. With maintenance, spare parts service and technical support, we ensure that your measurement technology operates reliably in the long term. In addition, our academy offers practical training courses for your team.

Workers display holographic data in factory hall

Consequences of Missing or Insufficient Measurement – More Than Just Scrap

Production deviations develop gradually. Without continuous measurement data, foreign objects, moisture fluctuations or structural changes in beet pulp or intermediate sugar products remain undetected for long periods – until scrap, complaints or unplanned downtime occur.

Economic consequences
Increased material consumption, unplanned downtime, rising unit costs.

Operational consequences
Unstable processes, frequent readjustments, overload of quality control.

Strategic consequences
Production performance becomes harder to predict, reduced competitiveness.

The cost of doing nothing is high. Reliable measurement technology is not a convenience option – it is a strategic prerequisite for stable processes.

finger in front of laptop points to holographic statistics

Sugar Production Presents Specific Measurement-Technology Requirements

Sugar production involves demanding process conditions in which reliable inline measurement is essential:

Typical challenges

  • Highly fluctuating moisture levels in raw materials such as beet pulp
  • Seasonal deposits and contaminations carried through the process
  • High speeds during transport, cleaning and processing
  • Limited accessibility to measurement points in closed or insulated plant sections
  • Delayed laboratory analyses for moisture and product quality

The result? Processes with high variation and error potential.

These risks are not theoretical – they occur daily, often go unnoticed and lead to significant costs.
That is why industrial measurement technology is not optional, but essential.
And this is exactly where Fagus-GreCon comes into play.

Everything at a glance: our measurement technology solutions

The data obtained from GreCon measurement systems forms the basis for efficient, stable and reproducible sugar production. Measurement takes place inline, continuously and fully process-integrated – precisely where deviations occur.

Supported measurement and optimisation tasks

  • Foreign object detection
  • Moisture measurement

The systems are modular, long-term stable and can be integrated into both existing and new plants. The goal is a reliable data foundation for well-founded decisions and efficient processes.

We look forward to hearing from you.

Please fill in all mandatory fields marked with an asterisk (*).